How to Use the 4-in-1 Can Cooler for Cans and Bottles

Quick answer

Twist off the capture ring, slide your can or bottle into the cooler, then thread the ring back on to lock it in place. The same cooler works as a cup or coaster too.

How to use the 4-in-1 can cooler step by step

1. 1. Remove the capture ring: Twist the threaded capture ring counterclockwise until it comes off the cooler body. Set it aside. Don't force it—the threads are fine; if it feels stuck, check that the ring is aligned.
2. 2. Insert your can or bottle: Slide your drink into the cooler body. For standard cans, skinny cans, or bottles, the opening is wide enough to fit without squeezing. If the drink is too tall, it may not fit fully; this cooler is designed for typical 12 oz cans and shorter bottles.
3. 3. Reattach the capture ring: Place the ring over the top of the can or bottle and twist it clockwise until it locks into place. The ring holds the drink securely. Make sure the ring is fully threaded—if it's loose, the drink might slide out when you tip it.
4. 4. Use as a cup or coaster: When not holding a can or bottle, the cooler body works as an insulated cup for cold drinks. The flat base also acts as a non-slip coaster. Wipe the base dry before setting it on wood surfaces to avoid any moisture from condensation.

Product highlights

• Stainless Steel 4-in-1 Can Cooler: The Ello Vacuum Insulated Stainless Steel Can Cooler fits standard cans, bottles, skinny cans, and can be used as a cup. You only need one cooler for almost any drink you grab, whether it's a soda can, a craft beer bottle, or a skinny seltzer.